weberseal acrylic GF

Weber Myanmar

This product is part of our comfort range.

weberseal acrylic GF is a one component water based acrylic joint
sealant and gap filler. It is semi-flexible and mold resistant.

Documentation and brochures

To know before applying

Material type : Acrylic polymer
Specific gravity : 1.7 kg./litre
Skinning time : ~ 10 minutes (+23 ํC / 50% RH)
Curing rate : ~ 2 mm/24h (+23 ํC / 50% RH)
Sag flow : Non sag
Movement capability : ± 10%
Temperature resistance : -20 ํC to +80 ํC
Extrusion rate : 20-80 g./10 sec
Shore a hardness : 40-60 after 28 days (+23 ํC / 50% RH)
E-Modulus : ~ 0.5 N/ mm2 at 100% elongation
Elongation at break : ~ 80% (+23 ํC / 50% RH)
Elastic recovery : > 10% (+23 ํC / 50% RH)
Fungus and algae resistance : Pass
Shrinkage : Approximately 15%

Unfortunately the consumption calculator tool is not available for this particular product.

Please refer to the product printable datasheet in order to assess quantities needed for you project.

Features and benefits

• Odourless, neutral curing
• Non corrosive
• Can be painted over using water based paints
• Can be sanded back once fully cured
• Water clean-up of uncured sealant
• Easy to smoothen and finish

Constraints

• Do not apply weberseal acrylic GF on bitumen, PE, PP, PTFE,
and silicone
• Protect uncured weberseal acrylic GF from rain or water
approximately 3 hours after application
• Do not use weberseal acrylic GF in areas subject to constant
water immersion

This product fits for these following projects