weberseal silicone NC

Specific gravity : 1.03 kg. /litre
Tack free time : 15 minutes
Curing rate : ~ 3 mm/24h (+23 ํC / 50% RH)
Slump : ≤ 3 mm
Movement capability : ±25%
Service temperature : -50 ํC to +150 ํC
Extrusion rate : 20-80 g./10 sec
Shore A hardness : 15-30 after 28 days (+23 ํC / 50% RH)
Tensile strength : ≥ 1 N/mm2 (+23 ํC / 50% RH)
Tensile shearing adhesive strength : ≥ 0.5 N/ mm2
Elongation at break : > 300% (+23 ํC / 50% RH)
UV and weathering resistance : Pass

• Non-corrosive
• Low odour
• Very good UV light and weathering resistance
• Primerless adhesion to a wide range of substrates
• Excellent chemical and salt resistance

Do not use weberseal silicone NC on PE, PP, PTFE