weberfloor 4716

New Product
Weber Myanmar

Primer is a styrene acrylate dispersion which can be diluted with water and is intended for use with weber’s flooring products. weberfloor 4716 does not contain ammonia. It offers good alkali resistance and adhesion
properties in both wet and dry environments.


Available sizes

  • [duplicate] [duplicate] [duplicate]

Documentation and brochures

To know before applying

  • The substrate should be dry, clean, and free from dust, cement, grease or other impurities which might prevent weberfloor 4716 from adhering to the substrate. If the substrate is highly absorb water there might be bubble formation on the applied surface, It’s recommended to apply another layer of primer. For correct film formation the substrate temperature should not fall below +6oC. For best results working temperature should be between +10 and +30oC

Unfortunately the consumption calculator tool is not available for this particular product.

Please refer to the product printable datasheet in order to assess quantities needed for you project.

Features and benefits

  • Can be used on dense and high-water-absorption substrates
  • Easy to use, only mix with water and apply with floor brush
  • Improves the adhesion of flooring products
  • Reduces the formation of pinholes in the levelling layer


weberfloor 4716 should be diluted with clean water according to the ratios given by weber

This product fits for these following projects