weberfloor 4716 New Product
5kg
Available sizes
- [duplicate] [duplicate] [duplicate]
Primer is a styrene acrylate dispersion which can be diluted with water and is intended for use with weber’s flooring products. weberfloor 4716 does not contain ammonia. It offers good alkali resistance and adhesion
properties in both wet and dry environments.
- The substrate should be dry, clean, and free from dust, cement, grease or other impurities which might prevent weberfloor 4716 from adhering to the substrate. If the substrate is highly absorb water there might be bubble formation on the applied surface, It’s recommended to apply another layer of primer. For correct film formation the substrate temperature should not fall below +6oC. For best results working temperature should be between +10 and +30oC
- Can be used on dense and high-water-absorption substrates
- Easy to use, only mix with water and apply with floor brush
- Improves the adhesion of flooring products
- Reduces the formation of pinholes in the levelling layer
weberfloor 4716 should be diluted with clean water according to the ratios given by weber
