weber.color plus
weber.color plus
Anti-fungus tile grout for wide joints suitable for grouting glass blocks and clay tiles.
- Low VOCs
- Anti-fungus and black mold
- Low absorption of water and any stain
- For 5-20 mm joint width
- Ideal for grouting glass blocks and clay tiles
Available sizes
- 1kg
Application Areas
interior tiles, interior tile surfaces
- Density of powder : 1.2 g/cm³
- Chemical curing time : 3 - 4 minutes
- Pot life (in shade) : 20-30 minutes
- Waiting time after tiling before grouting : 24 hours
- Recommended joint width : 5 - 20 mm
- Time before traffic : 24 hours
Remark: These test results are from laboratory test. They could be slightly different from on-site results because of the differences in applications and conditions.
- Grouting joint width 5-20 mm without crack
- Ideal for grouting glass blocks and clay tiles.
- Anti-fungus and black mold.
- Low absorption of water and any stain.
- Low VOCs.
- Biocide to protect the grouted areas from fungus
- Suitable for dry and humid areas such as bathroom, kitchen, and balcony
- Available in 4 colors
- Not suitable for narrow joint width (instead webercolor classic or webercolor power should be used).
- Not suitable to use in humid areas when grout is required to be anti-fungus (instead webercolor power should be used).
- Not suitable to use when the substrate movement is expected; exterior wall, parking area, wooden surface for instance (instead webercolor outside should be used).
- Not suitable to use in swimming pool (instead webercolor HR or webercolor poxy should be used).
- Not suitable if grout is required to be chemical- and acid-resistant; industry, hospital, food-storage area, for instance (instead webercolor poxy should be used).
